When an RV will not cool or heat properly, the equipment itself is only part of the picture. Airflow, ducting, thermostat commands, zone controls, wiring, capacitors, motors, ignition controls, and available electrical power can all change how the system behaves. On The Road RV Tech evaluates those pieces together so the repair recommendation is based on the way the climate system is actually operating.
An air conditioner that runs but doesn't cool can have a very different cause than a unit that never starts. We separate power, control, fan, compressor, airflow, and temperature-performance issues before deciding whether the problem is serviceable in the field or the rooftop unit should be considered for replacement.
12-volt DC system diagnostics
120-volt AC system diagnostics
Breakers, fuses, relays, and disconnects
Voltage-drop testing
Grounding and bonding concerns
Cooling complaints are not always sealed-system failures. Restricted filters, damaged or poorly arranged ducts, blocked airflow, leakage between supply and return sections, or distribution problems can reduce comfort even when the rooftop equipment is running. Temperature-differential and airflow checks help determine whether the system is moving and conditioning air correctly.
Airflow testing
Temperature-differential checks
Blocked or damaged duct inspection
Direct-discharge or non-ducted concerns
Rooftop AC cleaning and maintenance
A thermostat is the command center, but the failure may be in the thermostat, communication path, control board, sensor, or equipment being controlled. Multi-zone RVs add another layer because one display can command several pieces of equipment. We look at what the controls are asking for and what the system actually receives.
Thermostat diagnosis
Zone-control diagnosis
Control-board testing
Wiring and communication problems
Sensor and command verification
Correct diagnosis depends on knowing the exact equipment, model, control arrangement, and electrical requirements. The documented service scope includes Coleman-Mach and Furrion air-conditioning diagnostics along with manufacturer-specific troubleshooting. Model and serial information is especially helpful when the visit may involve replacement parts or control compatibility.
Coleman-Mach system diagnostics
Furrion air-conditioner diagnostics
Manufacturer-specific troubleshooting
Model and serial identification
Replacement compatibility review
A furnace may fail to light, light and shut down, cycle too often, or run the blower without producing heat. Diagnosis looks at the operating sequence, electrical supply, blower and airflow, thermostat demand, control board, and ignition-related components. Propane-related work is performed only where permitted by applicable requirements.
Furnace not heating
Ignition and operating diagnostics
Cycling or shutdown problems
Blower and airflow problems
Control-board, thermostat, and wiring concerns

A furnace may fail to light, light and shut down, cycle too often, or run the blower without producing heat. Diagnosis looks at the operating sequence, electrical supply, blower and airflow, thermostat demand, control board, and ignition-related components. Propane-related work is performed only where permitted by applicable requirements.
Furnace not heating
Ignition and operating diagnostics
Cycling or shutdown problems
Blower and airflow problems
Control-board, thermostat, and wiring concerns

An air conditioner that runs but doesn't cool can have a very different cause than a unit that never starts. We separate power, control, fan, compressor, airflow, and temperature-performance issues before deciding whether the problem is serviceable in the field or the rooftop unit should be considered for replacement.
12-volt DC system diagnostics
120-volt AC system diagnostics
Breakers, fuses, relays, and disconnects
Voltage-drop testing
Grounding and bonding concerns

Cooling complaints are not always sealed-system failures. Restricted filters, damaged or poorly arranged ducts, blocked airflow, leakage between supply and return sections, or distribution problems can reduce comfort even when the rooftop equipment is running. Temperature-differential and airflow checks help determine whether the system is moving and conditioning air correctly.
Airflow testing
Temperature-differential checks
Blocked or damaged duct inspection
Direct-discharge or non-ducted concerns
Rooftop AC cleaning and maintenance

A thermostat is the command center, but the failure may be in the thermostat, communication path, control board, sensor, or equipment being controlled. Multi-zone RVs add another layer because one display can command several pieces of equipment. We look at what the controls are asking for and what the system actually receives.
Thermostat diagnosis
Zone-control diagnosis
Control-board testing
Wiring and communication problems
Sensor and command verification
A furnace may fail to light, light and shut down, cycle too often, or run the blower without producing heat. Diagnosis looks at the operating sequence, electrical supply, blower and airflow, thermostat demand, control board, and ignition-related components. Propane-related work is performed only where permitted by applicable requirements.
Furnace not heating
Ignition and operating diagnostics
Cycling or shutdown problems
Blower and airflow problems
Control-board, thermostat, and wiring concerns

A furnace may fail to light, light and shut down, cycle too often, or run the blower without producing heat. Diagnosis looks at the operating sequence, electrical supply, blower and airflow, thermostat demand, control board, and ignition-related components. Propane-related work is performed only where permitted by applicable requirements.
Furnace not heating
Ignition and operating diagnostics
Cycling or shutdown problems
Blower and airflow problems
Control-board, thermostat, and wiring concerns

Correct diagnosis depends on knowing the exact equipment, model, control arrangement, and electrical requirements. The documented service scope includes Coleman-Mach and Furrion air-conditioning diagnostics along with manufacturer-specific troubleshooting. Model and serial information is especially helpful when the visit may involve replacement parts or control compatibility.
Coleman-Mach system diagnostics
Furrion air-conditioner diagnostics
Manufacturer-specific troubleshooting
Model and serial identification
Replacement compatibility review
Air conditioner runs but the RV stays warm
Air conditioner freezes or ices
One zone works and another does not
Thermostat does not control the equipment correctly
Furnace blower runs but there is no heat
Furnace lights and then shuts down
For cooling or heating problems, include the RV year and model, the climate equipment manufacturer, thermostat information, the exact symptom, and any error codes or unusual sounds.
Submit the RV information, current location, symptoms, error codes, prior repair details, and photos when available so the request can be reviewed before the next step.

Mobile troubleshooting and repair for complex, intermittent, or difficult-to-identify RV problems.

Service for air conditioners, furnaces, thermostats, and climate-control issues.

Diagnosis and service for RV refrigerators, water heaters, and related appliance controls.

Diagnostic and service support for Aqua-Hot hydronic heating and hot-water systems.

Troubleshooting for RV generator starting, shutdown, control, fuel-delivery, and electrical issues.

Mobile troubleshooting and repair for complex, intermittent, or difficult-to-identify RV problems.

Service for air conditioners, furnaces, thermostats, and climate-control issues.

Diagnosis and service for RV refrigerators, water heaters, and related appliance controls.

Diagnostic and service support for Aqua-Hot hydronic heating and hot-water systems.

Troubleshooting for RV generator starting, shutdown, control, fuel-delivery, and electrical issues.
We’re here to answer your most common questions about our electrical, battery and solar repair services.
The service scope includes rooftop AC diagnostics, electrical testing, airflow work, cleaning, preventive maintenance, and replacement. Sealed-refrigerant-system rebuilding should not be implied.
Yes. Blocked, damaged, or poorly designed duct systems are specifically included in the documented diagnostic scope.
Yes. Furnace ignition, operating, cycling, blower, airflow, control-board, thermostat, and wiring problems are included.
Yes. Thermostat and zone-control diagnosis is part of the confirmed service scope.
Air-conditioner replacement is included in the documented capabilities, subject to technician review, compatibility, safe access, and parts availability.
Tell us what your RV is doing. We’ll review the problem, identify the system involved, and help determine the next step for electrical, HVAC, plumbing, appliances, Aqua-Hot, slide-outs, leveling systems, generators, and more.
On The Road RV Tech provides mobile RV diagnostics and repair in Teton Valley, Idaho; Victor; Driggs; Jackson Hole, Wyoming; Jackson; and surrounding areas. Service is performed at approved locations and is subject to technician review, system condition, safe access, parts availability, manufacturer support, applicable requirements, and the practical limits of mobile field service.

We are On-the-Road RV Tech — master-certified mobile RV specialists who diagnose complex RV system problems and deliver reliable solutions tailored to your rig, wherever the road takes you.

On-the-Road RV Tech is Master-Certified in Mobile RV Diagnostics
©2025-2026 All Rights Reserved. On The Road Rv Tech | Designed by Online Marketing Experts